Features:
- A 95% reduction in the water used is normal when compared to constant flow immersion sterilisers.
- At least a 95% reduction in the cost of heating the water.
- Virtually no steam produced which reduces the risk of airborne nasties being picked up by the steam and condensing on surfaces above, with drips contaminating the carcasses.
- Activated by insertion of the tool into the unit. Safe and easy for operators.
- Fully automatic operation gives consistent results with any operator.
- New easy access design allows for ease of servicing, minimising down time
- Comes standard with water level sensing, which purges any air that gets into the tank automatically, preventing the heater element overheating and the thermal overload tripping.
- All the Econoliser models work with any temp. of water. Supplying the Econoliser with cold water and letting the built-in water heater heat the water is the most efficient and least expensive way of heating the water.
- The built-in water heater ensures the water temperature is always above 82°C/180°F, no matter what temperature the water supply is (setpoint is 90°/194°F)
- Because the Econolisers use so little water and therefore very little electrical energy to heat them, energy from a renewable source can be used, thereby reducing your carbon footprint.
Optional Extras
- External Temperature display which shows the temperature of the water leaving the nozzles
Specification
- Voltage ………………………………………………..:- 230/240VAC 50/60Hz
- Max Load current………………………………… :- 11A water heater version
- Dynamic Water Pressure min………………..:- 3Bar/45psi
- Sterilisation Min water Flow rate…………..:- 4.2L/min or 1 Gal/min
- Sterilisation Cycle time Factory set………..:- 4.5secs
- Sterilisation Water used per cycle………….:-0.140Ltrs or 4.75Fl oz
- Temperature setpoint……………………………:- 90°/194°F
Reviews
There are no reviews yet.